Find Brass Or Cast Iron Body, 3.5 Mpa Max Pressure, Flange Connection Type on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Water cooled chiller > EVR10-058S Normal Closed Refrigeration Solenoid Valve

EVR10-058S Normal Closed Refrigeration Solenoid Valve

  • EVR10-058S Normal Closed Refrigeration Solenoid Valve
  • EVR10-058S Normal Closed Refrigeration Solenoid Valve
  • EVR10-058S Normal Closed Refrigeration Solenoid Valve
  • EVR10-058S Normal Closed Refrigeration Solenoid Valve

EVR10-058S Normal Closed Refrigeration Solenoid Valve

    Payment Type: L/C,T/T,Paypal,Western Union
    Terms of Trade: FOB,CFR,CIF,EXW
    Min. Order: 1 Piece/Pieces
    Delivery Time: 5-9 Days
    Packaging: Pallets,Cartons,Boxs
    Productivity: 1100 sets/ 1 week
    Brand: BRANDO
    Transportation: Ocean,Land,Air
    Place of Origin: Ningbo China
    Supply Ability: 4450 sets/ 1 month
    Certificate: CE
    Port: Guangzhou,Tianjin,Shenzhen

Basic Info

Model No.: EVR10-058S

Product Description

EVR10-058S Normal Closed Refrigeration Solenoid Valve


EVR10-058S Normal Closed Refrigeration Solenoid Valve is a wide range of solenoid valves for use in refrigeration, refrigerator, and air conditioning units. Our company offers a normally closed (no) type, suitable for all fluoride refrigerants, with a medium temperature resistance of up to 105 ° C, a maximum working pressure difference of up to 25 bar, and a welded joint tube size of up to 2-1/8" The extended interface for welding makes installation easy and does not require removal of the valve body during welding.


Technical data:

Model: Pipe sizes H1 H2 H4 L L2

KV value

(m³/h)

SAE

Inlet/Outlet

ODF

Inlet/Outlet

Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm
EVR3-014 EVR3-014S 1/4 6 0.5 14 2.8 71

4.0 102 0.3 7 0.27
EVR3-038 EVR3-038S 3/8 10 0.5 14 2.9 73

4.6 117 0.4 10
EVR6-038 EVR6-038S 3/8 10 0.5 14 3.1 79

4.4 111 0.4 10 0.8
EVR6-012 EVR6-012S 1/2 12.8 0.5 14 3.1 79

5.0 127 0.4 10
EVR10-012 EVR10-012S 1/2 12.8 0.6 16 3.1 79

5.0 127 0.4 10 1.9
EVR10-058 EVR10-058S 5/8 16 0.6 16 3.1 79

6.3 160 0.5 12

EVR15-058S 5/8 16 0.7 19 3.4 86

6.9 176 0.5 12 2.6

EVR15-078S 7/8 22 0.7 19 3.4 86

6.9 176 0.7 17

EVR20-078S 7/8 22 0.8 20 3.5 90

7.5 191 0.7 17 5

EVR20-118S 1 1/8 28.8 0.8 20 3.5 90

8.4 214 0.8 22

EVR22-138S 1 3/8 35 0.8 20 3.5 90

11.1 281 1 25 6

EVR25-118S 1 1/8 28.8 1.5 38 5.4 138 2.8 72 10.0 256 0.8 22 10

EVR25-138S 1 3/8 35 1.5 38 5.4 138 2.8 72 11.0 281 1 25

EVR32-138S 1 3/8 35 1.9 47 4.4 111 2.1 53 11.0 281 1 25 16

EVR32-158S 1 5/8 42 1.9 47 4.4 111 2.1 53 11.0 281 1.1 29

EVR40-158S 1 5/8 42 1.9 47 4.4 111 2.1 53 11.0 281 1.1 29 25

EVR40-218S 2 1/8 54 1.9 47 4.4 111 2.1 53 11.0 281 1.3 34

Main parts chart of EVR10-058S Refrigeration Solenoid Valve:

Main parts chart of EVR10-058S Refrigeration Solenoid Valve

Pallet/Carton Packing of EVR10-058S Refrigerator Solenoid Valve:

Pallet/Carton Packing of EVR10-058S Refrigeration Solenoid Valve

Production Environment of EVR10-058S Air conditioning Electromagnetic Valve:

Production Environment of EVR10-058S Air conditioning Electromagnetic Valve


Description of Water/air cooled chillers with EVR10-058S refrigeration Electromagnetic Valve:

Water/air cooled chillers are available for small systems. Most large units are water cooled. The initial investment of water cooling is less than that of air cooling. But with cooling towers and machine rooms, electronic water treatment devices, there is no place to go! In addition, in the long run, the cooling efficiency of the water cooling unit will be relatively reduced, while the air cooling unit will not.

The air-cooled chiller adopts the air-cooled mode, which eliminates the Cooling Tower, cooling water pump and pipeline system essential to the cooling water system, prevents the condenser from scaling and blocking the water pipe in the water quality area, and saves water resources. In the cold water air conditioning equipment product, the most economical, the maintenance simplest model. The investment of air cooled chillers is slightly higher than that of water cooled chillers, but the annual operating cost is lower than that of water cooled chillers. Among all kinds of air-conditioning cooling and heating source systems, the machine room has the lowest construction cost and the maintenance cost is water-cooled. Or half the cost of the boiler. Air-cooled chillers are louder and cooler than water-cooled chillers and can only be installed outdoors. Most water chillers are installed in the basement.


Welcome to your inquiry!

NINGBO BRANDO HARDWARE CO.,LTD

 


BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.

4


BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.

1


BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
6


BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.

2


Quick review of BRANDO products:

valve

valves2

pulse valve

armature and coils



Company Info

  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters